Fortel Ind e Com Ltda

Infilling of metallographic samples with thermoplastic phenolic resin (bakelite) or acrylic resin with 30 mm diameter and 30 mm height; Manual pressurization and hydraulic system (Know how) of 4 tons;
Front valve closure and pressure relief system. Bourdon type analog manometer for pressure reading (280 KGF/cm ²/4000 LBT/POL ²).
Digital and automatic control system for controlling: Operation temperature, time of filling, cooling time;
Heating time: 8 to 15 minutes and refrigeration: 6 to 8 minutes, according to sample size and raw material to be used.
Stainless steel chamber cover with pins and thermal insulator, fast locking with M42 x 3 mm square thread. Internal parts in galvanized steel.
1020 Steel Case (# 1.9 mm), treatment with phosphate bath and textured epoxy paint (layer 80 µ) for corrosion protection.
Included kit for inlay: Bakelite black and red (1/2 kg each) and 1 release, hoses for water inlet and outlet and electrical power cable with plug (ABNT standard).
 inlay of samples with 30 mm diameter.
 manual pressurization and actuated by front lever.
 Chamber, Lower and upper piston in hardened steel, which guarantees the total parallelism of the samples.
 Heating system with 500 watts power and digital and automatic control system.
 power button and mushroom emergency stop button, according to ABNT.
 Luminous Indication (in Led and low voltage – 24 VDC) of the cycle step and audible warning and backlight of the end of the inlay cycle.
 Automatic refrigeration system in insulated copper, with water inlet and outlet. (Optional reservoir).
 Special hydraulic connections for high pressure.
 12 Month warranty and permanent technical assistance.
 installation, operation and programming Manual in Portuguese (BR).
 Optional double-inlay system.

Our equipments meet the safety standards NR9/NR10/NR12