Ayan Instrument Manufacturing Co., Ltd.

I. Product introduction:
Short-range molecular distiller is a special liquid-liquid separation technology, in a high vacuum state, so that the average freedom of the vapor molecule is greater than the distance between the evaporation surface and condensing surface, so that the difference of the evaporation rate of each component in the material liquid can be used to separate the liquid mixture.
Application s:
Fine chemicals, such as aromatic oil purification, purification of high polymer intermediates, extraction of wool lignin, etc.
Medicine field: such as extraction of natural vitamin AE, etc.
Food industry: such as refined fish oil - grease deacidization - refined high carbon alcohols , separation of mixed oils, etc.
Other areas: oil industry, chemicals, environmental protection, etc.

Product features:
1. Operating well below the temperature of the material boiling point, and the material stay time is short;
2. Effective removal of liquid substances such as organic solvents, odor, etc., for the use of solvent extraction liquid desoluble is a very effective method
3. Can have a choice of steaming volatile products, remove other impurities, through multi-stage separation can be separated at the same time more than 2 kinds of substances
4. Distillation vacuum is high, vacuum can reach less than 0.1pa, its internal can obtain a high degree of vacuum, usually molecular distillation under very low pressure
operation, so the material is not easily damaged by oxidation
5. Distilled liquid film thin, high heat transfer efficiency, film thickness less than 0.5mm
6. Higher degree of separation, molecular distillation can separate conventional lysing substances that are not easy to separate
7. There is no boiling bubble phenomenon, molecular distillation is the free evaporation on the surface of the liquid layer, carried out at low pressure, no dissolved air in the liquid, so
The whole liquid cannot be boiled during the distillation process, without the phenomenon of foaming.
8. Provide a variety of specifications customer selection, suitable for customer small test experiments, pilot experiments, if the need for greater evaporation area specifications can be customized according to customer requirements.
9. Physical separation method, non-toxic, harmless, non-polluting, no residue, can get pure and safe products
9. Scraping system is made of PTFE material and SS316L stainless steel material, with very high anti-corrosion effect;
10. The feed tank can be selected to achieve pre-heating function, the preheating temperature can be adjusted.
11. Each interface is sealed with fluorine gaskets, good air tightness, such as the customer needs corrosion resistance can be replaced with tetrafluoromaterial